WHITE Polishing Compound Jewelers Rouge Buffing Jewelry Buff Polish

WHITE POLISHING COMPOUND
SILVER POLISHING - FOR WHITE METALSPOLISHING COMPOUND - PRODUCT FOR POLISHING METAL 

White is formulated especially for Silversmiths and Goldsmiths to polish SILVER. The White Compound is widely used by Metalsmiths for a High Polish Finish. Compound is used on a buffer - motor by applying a small amount of this compound on a Muslin - Finex - White Buff.  Apply the compound to the buff surface, with the make sure buff edge is clean for best results. "A-1 TOP QUALITY PRODUCT"

Compound can be used for Bright Polish on White Metals - Gold - Silver

.
Bar Weight: 120 Grams - 4oz. (+/- Approximately)
·  Utilizes Graded Abrasives
·  Blended with Additives
·  Long Lasting Composition with Minimum Usage
·  Good Adhesion to Buffing Wheels 
·  Produces -  High Shine

 SALE IS FOR 1 BAR

NOTE: Visit  JETSINC.  ebay Store Listings, where you can see the full variety of  Polishing Compounds, Buffing Wheels and more Jewelers Equipment Tools & Supplies. JETS INC.

4E 716 CKSP   2X-8E 3X-13E 4X-1.0 FRE M  P

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible:  

·        Use the right compound for the metal that you are trying to polish
·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·       Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·        A clean buffing wheel edge is important.
·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.      
·        Whenever you are working with Platinum never use a buff that was used for another type of metal.
 
WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed. PROTECTION -  Protect yourself, your fingers and hands, your face and eyes and use respirators.